System 200V - Communication processors

Structure and Function

Communications processors are used to connect different target and source systems, e.g. via Ethernet to higher-level ERP systems or serially to scanners, printers and other peripherals.

CP 240 - serial

The communication processors CP 240 serial enable the serial process coupling to different target and source systems. Depending on the module they have a RS232 and/or a RS485 interface.

CP 240 - EnOcean

The CP 240 EnOcean enables process coupling on the basis of the EnOcean wireless communication. EnOcean is a battery-free radio system that, due to the short signal duration of 0.5 ms and 10 mW transmitting power, has an energy requirement of only 50 μWs. Here, the system uses the energy from the smallest changes in pressure or temperature to power the sensors.

CP 240 - M-Bus

In the case of the CP 240 M-Bus, the process coupling takes place on the basis of the M-Bus communication. The M-Bus System (Metering Bus) is a European-standardized 2-wire fieldbus for acquiring consumption data. Here, the data is transmitted serially via a reverse polarity protected 2-wire line from slave systems (meters) to a master system.

CP 240 - CAN-Clock

The CAN-Clock provides the CAN master time, date and the internally measured temperature via the CAN bus. Setting the date and time can be can take place either via a serial connectable GPS timer or via PDOs or SDOs.

Characteristics

Support for all standard protocols (ASCII, STX/ETX, 3964(R), RK512 and Modbus (master, slave)

Internal communication via VIPA FCs

Compact design

LED status indicator

Electrically isolated to the backplane bus

Assembly with 35 mm profile rail

24 month warranty